Cross-Cultural Collaboration and Student Learning in an International Community Engagement Program
DOI:
https://doi.org/10.55681/swarna.v5i10.4861Keywords:
International Community Engagement, Cross-Cultural Collaboration, Design Thinking, Experiential Learning, Work-Integrated LearningAbstract
Although international community engagement programs are widely implemented across higher education, qualitative evidence detailing how students internally process cross-cultural friction and contextual design adaptation remains sparse compared to administrative reporting. This study addresses this gap through a reflection-centered qualitative inquiry, analyzing reflection transcripts from ten Indonesian and Singaporean student participants (BINUS University and Singapore Polytechnic) engaged in short-term rural field projects at A Green and Yayasan KDM. Using reflexive thematic analysis grounded in Kolb's experiential learning cycle and Schön's reflection-in-action, the analysis revealed four core experiential dynamics. Intercultural dialogue developed by combining emotional translation with rapid visual sketching, while working-pace mismatches between structured planning and local flexibility were resolved through nightly debriefings and user-evidence affinity synthesis. Unscripted rural constraints forced a design pivot toward low-tech cardboard mockups refined through elder ergonomic feedback, while an immersive community stay shifted student perspectives away from top-down technical assumptions toward active community listening and empathy-rooted design ethics. These findings offer a reflective framework for structuring debriefings and ethical co-design in international service-learning, moving beyond superficial activity metrics.
Downloads
References
Baumber, A., Kligyte, G., Pratt, S., Melvold, J., Allen, L., Bowdler, B., Le Hunte, B., Buck, A., & Key, T. (2024). Wisdom on all sides: Reciprocal partnerships in transdisciplinary project-based work-integrated learning. International Journal of Work-Integrated Learning, 25(2), 215–233.http://hdl.handle.net/10453/179633
Bender-Salazar, R. (2023). Design thinking as an effective method for problem-setting and needfinding for entrepreneurial teams addressing wicked problems. Journal of Innovation and Entrepreneurship, 12, Article 24. https://doi.org/10.1186/s13731-023-00291-2
Bielefeldt, A. R., & Canney, N. E. (2016). Changes in the social responsibility attitudes of engineering students over time. Science and Engineering Ethics, 22(5), 1535–1551. https://doi.org/10.1007/s11948-015-9706-5
Bilous, R. H., Hammersley, L., & Lloyd, K. (2018). Reflective practice as a research method for co-creating curriculum with international partner organisations. International Journal of Work-Integrated Learning, 19(3), 287-296.
Braun, V., & Clarke, V. (2006). Using thematic analysis in psychology. Qualitative Research in Psychology, 3(2), 77–101. https://doi.org/10.1191/1478088706qp063oa
Braun, V., & Clarke, V. (2019). Reflecting on reflexive thematic analysis. Qualitative Research in Sport, Exercise and Health, 11(4), 589–597. https://doi.org/10.1080/2159676X.2019.1628806
Braun, V., & Clarke, V. (2021). One mapping technique, diverse analytical goals: Reflexive thematic analysis in qualitative research. SAGE Publications.
Bringle, R. G., & Hatcher, J. A. (2002). Campus-community partnerships: The terms of engagement. Journal of Social Issues, 58(3), 503–516. https://doi.org/10.1111/1540-4560.00273
Brown, T., & Wyatt, J. (2010). Design thinking for social innovation. Stanford Social Innovation Review, 8(1), 30–35.
Campbell, S., Greenwood, M., Prior, S., Shearer, T., Walkem, K., Young, S., Bywaters, D., & Walker, K. (2020). Purposive sampling: Complex or simple? Research case examples. Journal of Research in Nursing, 25(8), 652–661. https://doi.org/10.1177/1744987120927206
Castiblanco Jimenez, I. A., Mauro, S., Napoli, D., Marcolin, F., Vezzetti, E., Rojas Torres, M. C., Specchia, S., & Moos, S. (2021). Design thinking as a framework for the design of a sustainable waste sterilization system: The case of Piedmont Region, Italy. Electronics, 10(21), Article 2665. https://doi.org/10.3390/electronics10212665
Chan, S. C. F., Ngai, G., Ho-Yin Yau, J., & Por Kwan, K. (2021). Impact of international service-learning on students' global citizenship and intercultural effectiveness development. International Journal of Research on Service-Learning and Community Engagement, 9(1), Article 8. https://doi.org/10.37333/001c.31305
Conlon, E. (2008). The new engineer: Between employability and social responsibility. European Journal of Engineering Education, 33(2), 151–159. https://doi.org/10.1080/03043790801996371
Creswell, J. W., & Poth, C. N. (2018). Qualitative inquiry and research design: Choosing among five approaches (4th ed.). SAGE Publications.
Crouch, M., & McKenzie, H. (2006). The logic of small samples in interview-based qualitative research. Social Science Information, 45(4), 483–499. https://doi.org/10.1177/0539018406069584
Ferns, S. J., Zegwaard, K. E., Pretti, T. J., & Rowe, A. D. (2025). Defining and designing work-integrated learning curriculum. Higher Education Research & Development, 44(2), 371–385. https://doi.org/10.1080/07294360.2024.2399072
Jackson, D., & Dean, B. A. (2023). The contribution of different types of work-integrated learning to graduate employability. Higher Education Research & Development, 42(1), 93–110. https://doi.org/10.1080/07294360.2022.2048638
Jacott, L., & Nyland, B. (2022). Service-learning and intercultural competence in higher education: A framework for global community engagement. Journal of Higher Education Outreach and Engagement, 26(2), 45–62.
Kolb, D. A. (1984). Experiential learning: Experience as the source of learning and development. Prentice-Hall.
Kwon, B., Kim, H., & Lee, M. (2023). Empowering rural innovation through rapid prototyping: A design thinking case in agricultural cooperatives. International Journal of Innovation and Regional Development, 15(1), 23–38.
Lincoln, Y. S., & Guba, E. G. (1985). Naturalistic inquiry. SAGE Publications.
Mezirow, J. (1997). Transformative learning: Theory to practice. New Directions for Adult and Continuing Education, 1997(74), 5–12. https://doi.org/10.1002/ace.7401
Patton, M. Q. (2015). Qualitative research & evaluation methods: Integrating theory and practice (4th ed.). SAGE Publications.
Razzouk, R., & Shute, V. (2013). What is design thinking and why is it important? Review of Educational Research, 82(3), 330–348. https://doi.org/10.3102/0034654312457429
Salter, P., Lowrie, K., Howard, E., Bhati, A., Wong, C., Miles, D., & Jones, P. (2021). A continuum for global citizenship: Analyzing the complex transformations of service-learning. International Journal of Work-Integrated Learning, 22(2), 199–211.
Schön, D. A. (1983). The reflective practitioner: How professionals think in action. Basic Books.
Sutipitakwong, S., & Jamsri, P. (2020). Pros and cons of tangible and digital wireframes. In Proceedings of the 2020 IEEE Frontiers in Education Conference (FIE) (pp. 1–5). IEEE. https://doi.org/10.1109/FIE44824.2020.9274234
Valencia-Forrester, F. (2017, August 15). Purpose WIL. University-led WIL. https://faithvalencia-forrester.com/2017/08/15/purpose-wil/
Valencia-Forrester, F. (2020). Inclusive work-integrated learning in journalism education: A wise practice framework 10.25904/1912/1825
Valencia-Forrester, F. (2026). Sustaining community-engaged work-integrated learning: A decade of listening-centred, community-co-designed practice. Education Sciences, 16(9), Article 1566. https://doi.org/10.3390/educsci16091566
Weyrauch, T., & Riedausser, J. (2016). What is frugal innovation? Three defining criteria. Journal of Frugal Innovation, 2, Article 1. https://doi.org/10.1186/s40669-016-0005-y
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jastin Martino, Hannah Fithrotien Salsabila Nadiani, Vicky Taniady, Ulul Ilmi, Devanka Diaz Ayu Pitaloka

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.








