Quality Control Analysis Of Raw Materials At PT XYZ In Purwakarta Regency
DOI:
https://doi.org/10.55681/ijssh.v4i3.3295Keywords:
Quality Control, Cotton Raw Materials, Seven Tools, Textile IndustryAbstract
In the manufacturing industry, raw material quality is essential for maintaining product standards and competitiveness. PT XYZ, a textile company, uses cotton fibre in yarn production but continues to face defects, including dirty, wet and rotten cotton, animal hair, ropes, metal fragments, and clothing remnants. This study aims to analyse the planning, implementation, and evaluation of cotton fibre quality control and propose improvements using the Seven Tools method. A descriptive qualitative approach was employed, with data collected through interviews, observations, documentation, and literature reviews. Data trustworthiness was established through source, technique, and time triangulation. The findings show that quality control involves inspection, supervision, and corrective action. However, the defect rate remains at 5.2%, exceeding the company’s tolerance limit of 1%. Seven Tools analysis identified dirty cotton as the most dominant defect, primarily associated with human, material, method, and environmental factors. The company should strengthen supplier supervision, tighten incoming material inspections, and implement continuous improvement to reduce defects and maintain consistent raw material quality.
References
Adi, Lili, Bambang Widjajanta, Anbar Fadillah, Ari Riswanto, and Vika Aprianti. 2020. “Supply Chain Analysis of Hedonic Shopping Value on Behavioral Intention Creation of Multinational Footwear Company.” 8: 745–52. doi:10.5267/j.uscm.2020.7.005.
Eka Ludiya, Asep Kurniawan, Agus Rahayu, Hari Mulyadi1, Lili Adi Wibowo. 2024. “The Mediating Role of Organizational Capability in SMEs’ Business Performance.” 11(2): 443–56. doi:10.5281/zenodo.18046495.
Fadli, Muhammad Rijal. 2021. “Memahami Desain Metode Penelitian Kualitatif.” Medan, Restu Printing Indonesia, hal.57 21(1): 33–54. doi:10.21831/hum.v21i1.
Hardani, Helmina Andriani, Jumari Ustiawaty, Evi Fatmi Utami, Ria Rahmatul Istiqomah, Roushandy Asri Fardani, Dhika Juliana Sukmana, Nur Hikmatul Auliya. 2020. 5 Revista Brasileira de Linguística Aplicada Buku Metode Penelitian Kualitatif.
Jay Heizer, Barry Render, Chuck Munson. 2022. The SAGE Encyclopedia of Alcohol: Social, Cultural, and Historical Perspectives Operations Management Sustainability and Supply Chain Management. 12 Edition. doi:10.4135/9781483331096.n334.
John W. Creswell, J. David Creswell. 2018. Writing Center Talk over Time Research Design Qualitative, Quantitative, and Mixed Methods Approaches. doi:10.4324/9780429469237-3.
Neuman, W Lawrence. 2015. Social Research Methods: Qualitative and Quantitative Approaches.
Nugraha, Evan, Rini Mulyani Sari, Arif Yunan, and Asep Kurniawan. 2022. “The Effect of Information Technology , Competence , and Commitment to Service Quality and Implication on Customer Satisfaction.” 13(February): 827–36. doi:10.14716/ijtech.v13i4.3809.
Ratnamurni, Elis Dwiana, Eka Ludiya, and Amanda Luthfiartie. 2022. “Quality Risk Management In Infusation Product Distribution Using Failure Mode And Effect Analysis ( FMEA ) And Analytical Hierarchy Process ( AHP ) Methods.” : 229–44.
Romi, Mochamad Vrans. 2024. “The Influence of Emotional and Spiritual Intelligence on Lecturer Performance Through Organisational Citizenship Behaviour in Private Universities.” 6(2): 383–404. doi:10.15575/ks.v6i2.38454.
Romi, Mochamad Vrans, Nada Alsubki, and Hana Mohammed Almadhi. 2022. “The Linkage Between Leadership Styles , Employee Loyalty , and Turnover Intention in Healthcare Industry.” 13(April): 1–5. doi:10.3389/fpsyg.2022.890366.
Sugiyono. 2023. Metode Penelitian Kuantitatif Kualitatif Dan R&D.
Braun, W. J., & Han, L. (2017). Visualizing capability and stability on a single chart. Quality Technology & Quantitative Management, 14(4), 454–477. https://doi.org/10.1080/16843703.2017.1304042
Halizah, Z. N., & Sumarna, A. D. (2023). The quality control using seven tools method for defect product on scanner production. Jurnal Akunida, 9(1), 25–36. https://doi.org/10.30997/jakd.v9i1.7001
Nugraha, I., Murti, R. H. A., Ramadhan, F., Jawwad, M. A. S., Nugrahadi, B., Fauziyah, N. A., & Nugraha, R. E. (2022). Quality control analysis of woven fabric production in the weaving process in XYZ with total quality management method. Nusantara Science and Technology Proceedings, 283–289. https://doi.org/10.11594/nstp.2022.2742
Ratnamurni, E. D., Ludiya, E., & Luthfiartie, A. (2022). Quality risk management in infusation product distribution using failure mode and effect analysis (FMEA) and analytical hierarchy process (AHP) methods. International Journal of Science, Technology & Management, 3(1). https://doi.org/10.46729/ijstm.v3i1.429
van der Sluijs, M. H. J., & Hunter, L. (2018). Cotton contamination. Textile Progress, 49(3), 137–171. https://doi.org/10.1080/00405167.2018.1437008
Al-Bar, A., & Tjahyono, R. (2026). Quality control analysis using the Seven Tools and Kaizen methods to minimize terminal defects in the crimping process. Jurnal Sistem Teknik Industri, 28(1), 57–68. https://doi.org/10.32734/jsti.v28i1.23738
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Aulia Rahmah Fathonah, Eka Ludiya

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.




