Analisis Green Productivity Produk Inner Karung Plastik dengan Metode LCA (Life Cycle Assessment) di PT Murni Mapan Makmur Pasuruan

Muchammad Zaidan Fahmi Dzikrullah; Abdul Wahid

Authors

Muchammad Zaidan Fahmi Dzikrullah Fakultas Teknik, Universitas Yudharta Pasuruan, Indonesia
Abdul Wahid Fakultas Teknik, Universitas Yudharta Pasuruan, Indonesia

Keywords:

Life Cycle Assessment, Green Productivity, Plastic Waste

Abstract

Penelitian ini menganalisis penerapan Green Productivity dengan metode Life Cycle Assessment (LCA) pada proses produksi inner karung Phonska di PT. Murni Mapan Makmur, Pasuruan. Latar belakang penelitian berangkat dari tingginya konsumsi energi listrik, penggunaan bahan baku polyethylene (PE), serta timbulnya limbah plastik yang signifikan. Analisis LCA menunjukkan bahwa tahapan ekstrusi menjadi penyumbang dampak lingkungan terbesar melalui konsumsi energi, sedangkan proses cutting dan sealing menghasilkan limbah plastik dalam jumlah tinggi akibat produk cacat. Penerapan konsep Green Productivity melalui kalibrasi mesin, penggantian pisau berkala, standarisasi parameter pemotongan, dan peningkatan pengawasan produksi berhasil menurunkan limbah plastik sebesar 40%, meningkatkan penggunaan bahan ramah lingkungan dari 10% menjadi 50%, serta meningkatkan efisiensi pemanfaatan limbah dari 30% menjadi 70%. Hasil penelitian ini menegaskan bahwa integrasi LCA dan Green Productivity mampu memberikan rekomendasi berbasis data untuk peningkatan produktivitas sekaligus pengurangan dampak lingkungan secara berkelanjutan.

Downloads

Download data is not yet available.

References

Acarer, S. (2023). A review of microplastic removal from water and wastewater by membrane technologies. Water Science and Technology, 88(1), 199–219. https://doi.org/10.2166/wst.2023.186

Adi, B. K., Joko, T., & Setiani, O. (2022). Life Cycle Assessment , Is it Beneficial for Environmental Sustainability ? A Literature Review. VII(3), 3243–3251.

Aiguobarueghian, I., Adanma, U. M., Ogunbiyi, E. O., & Okina, N. (2024). Waste management and circular economy : A review of sustainable practices and economic benefits.

Astuti, R., Kurniawan, B. C., & Setiyawan, D. T. (2021). Implementation of Life Cycle Assessment ( LCA ) in environmental impact evaluation on production of ground coffee. 04019, 1–12.

Bajdur, W. M., & Włodarczyk-makuła, M. (2024). Application of the Life Cycle Assessment ( LCA ) Method in Assessing the Environmental Impact of New Materials Derived from Waste Polymers in Terms of Sustainability. 1–15.

Bodoga, A., Nistorac, A., Loghin, M. C., & Isopescu, D. N. (2024). Environmental Impact of Footwear Using Life Cycle Assessment — Case Study of Professional Footwear. 1–14.

Bullard, J. E., Zhou, Z., Davis, S., & Fowler, S. (2023). Breakdown and modification of microplastic beads by aeolian abrasion. Environmental Science & Technology, 57(1), 76–84. https://doi.org/10.1021/acs.est.2c05396

Cheng, C., Ahmad, S. F., Irshad, M., Alsanie, G., Khan, Y., Bani, A. Y. A., Ayassrah, A., & Aleemi, A. R. (2023). Impact of Green Process Innovation and Productivity on Sustainability : The Moderating Role of Environmental Awareness. 1–19.

Choudhary, K., Sangwa, N. R., Sangwan, K. S., & Singh, R. K. (2022). Impact of lean and quality management practices on green supply chain performance: An empirical study on ceramic enterprises. Quality Management Journal, 29(3), 193–211. https://doi.org/10.1080/10686967.2022.2083036

Elgarahy, A. M., Eloffy, M. G., Priya, A. K., Hammad, A., Zahran, M., Maged, A., & Elwakeel, K. Z. (2024). Sustainable Chemistry for the Environment Revitalizing the circular economy : An exploration of e-waste recycling approaches in a technological epoch. Sustainable Chemistry for the Environment, 7(June), 100124. https://doi.org/10.1016/j.scenv.2024.100124

Fatimah, S., Rahayuningsih, M., Marianti, A., & Irambona, A. (2024). Dwija Cendekia : Jurnal Riset Pedagogik. 8(2), 168–188. https://doi.org/10.20961/jdc.v8i2.86339

Ferrazzi, M., Frecassetti, S., Bilancia, A., & Portioli-Staudacher, A. (2025). Investigating the influence of lean manufacturing approach on environmental performance: A systematic literature review. The International Journal of Advanced Manufacturing Technology, 136(9), 4025–4044. https://doi.org/10.1007/s00170-024-13215-5

Hadiati, N., Rohmayanti, T., Studi, P., Pangan, T., Ilmu, F., Halal, P., Djuanda, U., & Korespondensi, P. (2022). PENGGUNAAN KEMASAN PLASTIK POLIETILEN BIODEGRADABLE. 8(2), 83–92.

Haryani, E., Herdiansyah, H., Edhi, T., & Soesilo, B. (2025). Strategies Inclusive Green Productivity for Environmental Sustainability in the Palm Oil Industry. 8(2), 219–231.

He, Q., Id, Y. H., & Wang, L. (2021). The impact of environmental regulation on green total factor productivity : An empirical analysis. 1–15. https://doi.org/10.1371/journal.pone.0259356

Heijungs, R. (2024). New life cycle impact methods require another type of life cycle inventory results. The International Journal of Life Cycle Assessment, 29(11), 2004–2007. https://doi.org/10.1007/s11367-024-02363-1

Ijaz, T., Haider, A., Qazalbash, R., Razzaq, A. A., & Rafique, M. Z. (2024). Development of green manufacturing implementation framework based on life-cycle assessment. Sustainable Environment Research. https://doi.org/10.1186/s42834-024-00229-7

Islam, M. F., Masud, A. Al, & Shuvro, R. A. (2025). Integrating green HRM for productivity and sustainability : green innovation , engagement and pro ‑ environmental behavior as key mediators. Future Business Journal. https://doi.org/10.1186/s43093-025-00433-w

Kaynak, E., & Piri, I. S. (2025). Revisiting the Basics of Life Cycle Assessment and Lifecycle Thinking. 1–17.

Laurent, A., Weidema, B. P., Bare, J., Liao, X., Souza, D. M. De, Pizzol, M., Sala, S., Schreiber, H., & Thonemann, N. (2021). interpretation phase. https://doi.org/10.1111/jiec.13012.Submit

Leonzio, G. (2024). applied sciences Life Cycle Assessment of Carbon Dioxide Supply Chains : State of the Art and Methodology Description.

Li, C., Fayaz, S., Bani, A. Y. A., Ayassrah, A., Irshad, M., Telba, A. A., Mahrous, E., & Imran, M. (2023). Heliyon Green production and green technology for sustainability : The mediating role of waste reduction and energy use. Heliyon, 9(12), e22496. https://doi.org/10.1016/j.heliyon.2023.e22496

Liu, J., & Yu, M. (2024). Analysis of green productivity in manufacturing based on different air pollution levels. 1–15.

Lufu, R., & Ambaw, A. (2021). Dynamics and Physical and Physiological Quality of Pomegranate Fruit during Cold Storage.

Lupi, G., Manzini, R., Lupi, G., Accorsi, R., Battarra, I., Manzini, R., Mater, A., & Mater, A. (2024). ScienceDirect Assessment of of reusable reusable plastic plastic containers containers throughout throughout the the fruit fruit and of reusable plastic containers throughout the fruit Life Cycle Assessment of reusable plastic containers throughout the fruit and and vegetables supply chain vegetables supply chain throughout the fruit and Assessment of of reusable reusable plastic containers vegetables supply chain Life Cycle plastic containers throughout the fruit and vegetables supply chain vegetables supply chain vegetables supply. IFAC PapersOnLine, 58(19), 451–456. https://doi.org/10.1016/j.ifacol.2024.09.253

Midolo, G., Cutuli, G., Porto, S. M. C., Ottolina, G., Paini, J., & Valenti, F. (2024). OPEN LCA analysis for assessing environmenstal sustainability of new biobased chemicals by valorising citrus waste. Scientific Reports, 1–13. https://doi.org/10.1038/s41598-024-72468-y

Moutik, B., Summerscales, J., Graham-jones, J., & Pemberton, R. (2023). Life Cycle Assessment Research Trends and Implications : A Bibliometric Analysis.

Naeemah, A. J., & Wong, K. Y. (2022). Positive impacts of lean manufacturing tools on sustainability aspects: A systematic review. Journal of Industrial and Production Engineering, 39(7), 552–571. https://doi.org/10.1080/21681015.2022.2041742

Ngo, T., Le, T., Hong, H., Aviral, T., & Tiwari, K. (2026). Determinants of global green growth efficiency and productivity : a comprehensive three stages data envelopment analysis.

Nordahl, S. L., & Scown, C. D. (2024). Recommendations for life-cycle assessment of recyclable plastics in a circular economy. Chemical Science, 15(25), 9397–9407. https://doi.org/10.1039/D4SC01340A

Olatayo, K. I., Mativenga, P. T., & Marnewick, A. L. (2023). Plastic value chain and performance metric framework for optimal recycling. Journal of Industrial Ecology, 27(2), 601–623. https://doi.org/10.1111/jiec.13384

Panagiotopoulou, V. C., Stavropoulos, P., & Chryssolouris, G. (2022). A critical review on the environmental impact of manufacturing: A holistic perspective. The International Journal of Advanced Manufacturing Technology, 118(1–2), 603–625. https://doi.org/10.1007/s00170-021-07980-w

Pentingkah, S., Penilaian, S., Hidup, S., Penggunaan, P., Bibliometrik, A., & Masa, A. (2024). Jurnal Teknologi Lingkungan How Important is the Life Cycle Assessment ( LCA ) Study of Plastic Waste ? Use of Bibliometric Analysis to Reveal Research Positions and Future Directions. 25(1), 10–19.

Prasetia, B. (2024). Tarjih : Agribusiness Development Green Productivity Techniques for Analyzing Productivity in Agroindustry. 04, 24–30.

Rosenboom, J.-G., Langer, R., & Traverso, G. (2022). Bioplastics for a circular economy. Nature Reviews Materials, 7(2), 117–137. https://doi.org/10.1038/s41578-021-00407-8

Rosmiati, V. (2020). Life Cycle Assessment and Energy Efficiency from Industry of Plastic Waste Recycling. 06015, 1–9.

Silva, S. De, Carson, P., Indrapala, D. V, Warwick, B., & Reichman, S. M. (2023). Land application of industrial wastes : impacts on soil quality , biota , and human health. Environmental Science and Pollution Research, 67974–67996. https://doi.org/10.1007/s11356-023-26893-7

Sophie, A. H., Erasmo, H., & Jo, C. (2026). Methodological strategies for social life cycle assessment of an emerging technology : a case study on circular flexible plastic packaging. 8, 1–23.

Tascione, V., Simboli, A., Taddeo, R., Del, M., & Raggi, A. (2024). A comparative analysis of recent life cycle assessment guidelines and frameworks : Methodological evidence from the packaging industry. Environmental Impact Assessment Review, 108(March), 107590. https://doi.org/10.1016/j.eiar.2024.107590

Timotius, E., Sukmarani, G., Kristen, U., & Wacana, K. (2021). Industrial Waste Treatment Management : A Review. 4(May), 1–8.

Val, S. (2025). Enhancing Sustainability with LCA : A Comparative Analysis of Design and Manufacturing Processes.

Wang, S., Id, Y. Z., & Yang, H. (2024). Digital economy and green total factor productivity in China. 1–26. https://doi.org/10.1371/journal.pone.0299716

Wulandari, I. A. S., Ravita, N., & Cahyana, A. S. (2024). A Model for Enhancing the Environmental Performance by Integrating Lean and Green Productivity Concept : A Case Study of Food Production. 25(1), 83–96.

Yusrina, Y. Z. (2023). Peningkatan Produktivitas Dan Kinerja Lingkungan Pada. 27(1), 320–326. https://doi.org/10.46984/sebatik.v27i1.2278